{"title":"RTi Paint Air Dryers","description":"\u003cp\u003ePoint-of-use desiccant dryers that deliver -40°F dew point, oil-free air to the paint gun. Choose RTi's self-regenerating Perfect Air® systems for one or two guns, or the Eliminator® II two- and three-stage booth dryers. Not sure which? See \u003ca href=\"\/pages\/which-rti-dryer\"\u003ewhich RTi dryer do I need?\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eAuthorized RTi dealer. Free shipping on RTi orders over $1,200.\u003c\/p\u003e","products":[{"product_id":"rti-eh4000-air-filter-system","title":"RTi Eliminator® II EH4000 Two-Stage Desiccant Paint Air Dryer – 25 SCFM","description":"\u003cp\u003e\u003cstrong\u003eDry, oil-free air to -40°F at the booth — so oil and water never end up as fisheyes in your finish.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Eliminator® II EH4000 is a two-stage point-of-use desiccant dryer for paint booths and prep stations. The first stage is an activated carbon element in an Inverse-Flow® housing that pulls out water, dirt and oil vapor; the second is a contained desiccant cartridge with a built-in 1 micron final filter, so there is no desiccant dust migration. A true air-stream moisture indicator shows when the desiccant needs changing. The three models differ only in outlet regulator size — pick the one your paint manufacturer specifies.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProvides continuous dry, oil-free air to -40°F dew point.\u003c\/li\u003e\n\u003cli\u003e2 in 1: activated carbon pre-filter for superior oil vapor removal and built-in final filter with contained desiccant cartridge.\u003c\/li\u003e\n\u003cli\u003eInverse-Flow® Technology with deep 1st-stage filter.\u003c\/li\u003e\n\u003cli\u003eTool-less spin-on\/spin-off elements and quick disconnect clamp ring — no tools required for service.\u003c\/li\u003e\n\u003cli\u003eAutomatic drain on the 1st stage, with manual override.\u003c\/li\u003e\n\u003cli\u003eTrue air-stream moisture indicator.\u003c\/li\u003e\n\u003cli\u003eHigh flow relieving regulator with chrome case, glass lens gauge.\u003c\/li\u003e\n\u003cli\u003e½\" shut-off valve on inlet.\u003c\/li\u003e\n\u003cli\u003eNon-corrosive aluminum bowls. Low pressure drop design.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMax. flow: 25 SCFM to the gun\u003c\/li\u003e\n\u003cli\u003eInlet: ½\" NPT\u003c\/li\u003e\n\u003cli\u003eOutlet regulator: ¼\" (EH4000), ⅜\" (EH4000-3R) or ½\" (EH4000-4R)\u003c\/li\u003e\n\u003cli\u003eDew point: -40°F\u003c\/li\u003e\n\u003cli\u003eFiltration: 1 micron final; activated carbon oil absorption to 0.003 ppm\u003c\/li\u003e\n\u003cli\u003eDifferential pressure: under 5.0 PSID at rated flow\u003c\/li\u003e\n\u003cli\u003eMax. pressure 150 PSIG · Max. operating temperature 125°F (100°F recommended)\u003c\/li\u003e\n\u003cli\u003eSize: 19\" H × 15\" W × 5\" D · Weight: 12 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eTwo-stage dryer with regulator and gauge, ½\" inlet ball valve, drain hose kit and mounting brackets\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplacement Elements\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1st stage: 4P-060 activated carbon element — change at least every 6 months, or when the green indicator turns red\u003c\/li\u003e\n\u003cli\u003e2nd stage: DE401 desiccant element — change when the indicator turns from light blue to purple-pink, or every 3 months (DE406 = 6-pack)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePaint booths and prep stations\u003c\/li\u003e\n\u003cli\u003eLacquer spraying\u003c\/li\u003e\n\u003cli\u003eAny single-gun spraying operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eUsage \u0026amp; Care\u003c\/h3\u003e\u003cp\u003eThe Eliminator® II is designed to operate one paint gun only. Install it at (but not inside) the paint booth, as close to the point of use and as far from the compressor as possible, with air flowing in the direction of the arrows.\u003c\/p\u003e\u003ch3\u003eDocuments \u0026amp; Downloads\u003c\/h3\u003e\u003cp\u003eTechnical literature published by RTi (Reading Technologies, Inc.):\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.rti-pbe.com\/s\/A002-Eliminator-II-zem4.pdf\" target=\"_blank\" rel=\"noopener\"\u003eEliminator® II series spec sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.rti-pbe.com\/s\/A004-EH4000-dpes.pdf\" target=\"_blank\" rel=\"noopener\"\u003eEH4000 spec sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.rti-pbe.com\/s\/A005-EH4000-3R-b2fn.pdf\" target=\"_blank\" rel=\"noopener\"\u003eEH4000-3R spec sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.rti-pbe.com\/s\/A051-EH4000-4R-ezdc.pdf\" target=\"_blank\" rel=\"noopener\"\u003eEH4000-4R spec sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.rti-pbe.com\/s\/A043-Eliminator-II-Systems-Technology.pdf\" target=\"_blank\" rel=\"noopener\"\u003eEliminator® II good \/ better \/ best (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.rti-pbe.com\/s\/Eliminator-II-Service-Sheet.pdf\" target=\"_blank\" rel=\"noopener\"\u003eEliminator® II service sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.rti-pbe.com\/s\/Filter_Dryer-Maintenance-Sheet_EH4000-EH4000-3R.pdf\" target=\"_blank\" rel=\"noopener\"\u003eEH4000 filter \u0026amp; dryer maintenance log (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.rti-pbe.com\/s\/EH4000-Breakdown-28zj.pdf\" target=\"_blank\" rel=\"noopener\"\u003eEH4000 parts breakdown (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.rti-pbe.com\/s\/EH4000-3R-Breakdown-f44n.pdf\" target=\"_blank\" rel=\"noopener\"\u003eEH4000-3R parts breakdown (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.rti-pbe.com\/s\/EH4000-4R-Breakdown-zn2d.pdf\" target=\"_blank\" rel=\"noopener\"\u003eEH4000-4R parts breakdown (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eRTi stands behind its products and offers a warranty for up to 1 year after date of purchase.\u003c\/p\u003e\u003ch3\u003eWhy Buy RTi From Spray Booth Shop\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuthorized RTi online dealer\u003c\/strong\u003e — genuine Reading Technologies, Inc. product, made by the company that has built paint-air filtration since 1986.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFree shipping on RTi orders over $1,200.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed something custom?\u003c\/strong\u003e RTi builds units around your shop's exact needs. Call us and we'll work it out with them.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eCA PROPOSITION 65 WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov\/product\u003c\/small\u003e\u003c\/p\u003e","brand":"RTi","offers":[{"title":"EH4000 – ¼\" Regulator","offer_id":47879817724163,"sku":"EH4000","price":1079.6,"currency_code":"USD","in_stock":true},{"title":"EH4000-3R – ⅜\" Regulator","offer_id":49783132881155,"sku":"EH4000-3R","price":1142.1,"currency_code":"USD","in_stock":true},{"title":"EH4000-4R – ½\" Regulator","offer_id":49783132913923,"sku":"EH4000-4R","price":1188.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0811\/2924\/2883\/files\/RTi-EH4000.jpg?v=1792440519"},{"product_id":"rti-eh7000-three-stage-desiccant-dryer","title":"RTi Eliminator® II EH7000 Three-Stage Desiccant Paint Air Dryer – Heavy Duty","description":"\u003cp\u003e\u003cstrong\u003eFor shops with dirty air: three stages, 0.01 micron, -40°F dew point — designed to eliminate fisheyes from compressed air.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePerfect for body shops with high levels of contamination, the EH7000 adds the largest 0.01 micron coalescer on the market between the activated carbon pre-filter and the desiccant stage. RTi rates it the \"best\" of its Eliminator® II booth dryers. Choose a ⅜\" (EH7000-3R) or ½\" (EH7000-4R) outlet regulator.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned to provide continuous dry, oil-free air to -40°F dew point.\u003c\/li\u003e\n\u003cli\u003e3 in 1: activated carbon pre-filter for superior oil vapor removal and built-in final filter with contained desiccant cartridge — no desiccant dust migration.\u003c\/li\u003e\n\u003cli\u003eLargest 0.01 micron coalescer on the market.\u003c\/li\u003e\n\u003cli\u003eRemoves water, dirt and oil contamination (removes all oil mist).\u003c\/li\u003e\n\u003cli\u003eTool-less spin-on\/spin-off elements; comes with two PB-004 brackets for easy mounting.\u003c\/li\u003e\n\u003cli\u003eInverse-Flow® Technology, low pressure drop design.\u003c\/li\u003e\n\u003cli\u003eHigh flow relieving regulator.\u003c\/li\u003e\n\u003cli\u003eAutomatic drain on first stage, manual petcock drains on second and third stages.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFlow capacity: 30 SCFM at 100 PSI\u003c\/li\u003e\n\u003cli\u003eInlet: ½\" NPT · Regulator: ⅜\" (EH7000-3R) or ½\" (EH7000-4R)\u003c\/li\u003e\n\u003cli\u003eDew point: -40°F\u003c\/li\u003e\n\u003cli\u003eFiltration: 0.01 micron and larger; activated carbon oil absorption to 0.003 ppm\u003c\/li\u003e\n\u003cli\u003eDifferential pressure: under 5.0 PSID at rated flow\u003c\/li\u003e\n\u003cli\u003eMax. pressure 150 PSIG · Recommended temperature 100°F\u003c\/li\u003e\n\u003cli\u003eSize: 17\" H × 16\" W × 4.75\" D · Weight: 20 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eThree-stage dryer with regulator and gauge, ½\" inlet ball valve, drain hose kit and two PB-004 mounting brackets\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplacement Elements\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1st stage: 4P-060 — change every 6 months\u003c\/li\u003e\n\u003cli\u003e2nd stage: 3C-090 — change every 6 months\u003c\/li\u003e\n\u003cli\u003e3rd stage: DE401 — change when the indicator turns pink, or every 3 months (DE406 = 6-pack)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePaint booths and prep stations with high contamination\u003c\/li\u003e\n\u003cli\u003eShops fighting fisheyes and oil in the finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDocuments \u0026amp; Downloads\u003c\/h3\u003e\u003cp\u003eTechnical literature published by RTi (Reading Technologies, Inc.):\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.rti-pbe.com\/s\/A007-EH7000-3R-m2lr.pdf\" target=\"_blank\" rel=\"noopener\"\u003eEH7000-3R spec sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.rti-pbe.com\/s\/A052-EH7000-4R-zjjd.pdf\" target=\"_blank\" rel=\"noopener\"\u003eEH7000-4R spec sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.rti-pbe.com\/s\/A043-Eliminator-II-Systems-Technology.pdf\" target=\"_blank\" rel=\"noopener\"\u003eEliminator® II good \/ better \/ best (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.rti-pbe.com\/s\/Eliminator-II-Service-Sheet.pdf\" target=\"_blank\" rel=\"noopener\"\u003eEliminator® II service sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.rti-pbe.com\/s\/Filter_Dryer-Maintenance-Sheet_EH7000-3R-EH7000-4R.pdf\" target=\"_blank\" rel=\"noopener\"\u003eEH7000 filter \u0026amp; dryer maintenance log (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.rti-pbe.com\/s\/EH7000-3R-Breakdown-t7dx.pdf\" target=\"_blank\" rel=\"noopener\"\u003eEH7000-3R parts breakdown (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.rti-pbe.com\/s\/EH7000-4R-Breakdown-7a83.pdf\" target=\"_blank\" rel=\"noopener\"\u003eEH7000-4R parts breakdown (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eRTi stands behind its products and offers a warranty for up to 1 year after date of purchase.\u003c\/p\u003e\u003ch3\u003eWhy Buy RTi From Spray Booth Shop\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuthorized RTi online dealer\u003c\/strong\u003e — genuine Reading Technologies, Inc. product, made by the company that has built paint-air filtration since 1986.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFree shipping on RTi orders over $1,200.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed something custom?\u003c\/strong\u003e RTi builds units around your shop's exact needs. Call us and we'll work it out with them.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eCA PROPOSITION 65 WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov\/product\u003c\/small\u003e\u003c\/p\u003e","brand":"RTi","offers":[{"title":"EH7000-3R – ⅜\" Regulator","offer_id":49783132061955,"sku":"EH7000-3R","price":1377.9,"currency_code":"USD","in_stock":true},{"title":"EH7000-4R – ½\" Regulator","offer_id":49783132094723,"sku":"EH7000-4R","price":1420.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0811\/2924\/2883\/files\/RTi-EH7000-3R.jpg?v=1791911535"},{"product_id":"rti-perfect-air-paint-air-system","title":"RTi Perfect Air® Desiccant Paint Air System – PERF-25 (1 Gun) \/ PERF-50 (2 Guns)","description":"\u003cp\u003e\u003cstrong\u003e-40°F dew point air at the gun, every coat — the clean, dry air today's waterborne paints demand.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Perfect Air® paint air systems provide the driest, most cost-effective air for spraying when only \"the best air will do.\" Engineered and built by RTi for spraying today's hi-tech paints, Perfect Air® is designed to supply the clean, dry air paint manufacturers call for with waterborne paints. The self-regenerating desiccant dryer uses a dry-air purge to recondition its beds, so there is no routine desiccant change — just change the desiccant every 3–5 years. Choose the PERF-25 for one gun or the PERF-50 for two.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConsistent -40°F dew point to the gun, with 3% or less compressed air humidity (CAH).\u003c\/li\u003e\n\u003cli\u003eHelps prevent dieback, cloudiness in clear finish, and more.\u003c\/li\u003e\n\u003cli\u003eFor HVLP and conventional spray guns. No upstream dryer required.\u003c\/li\u003e\n\u003cli\u003eSelf-regenerating desiccant dryer requires less routine maintenance — no heat needed, only 2 moving parts.\u003c\/li\u003e\n\u003cli\u003eUses less than 1\/10th of 1 amp to operate the solenoid valve.\u003c\/li\u003e\n\u003cli\u003ePatented Inverse-Flow® 2-stage pre-filter: 1 micron, then 0.01 micron coalescing.\u003c\/li\u003e\n\u003cli\u003e0.01 micron after filter downstream of the dryer.\u003c\/li\u003e\n\u003cli\u003eFaster cure times — increased production. Quiet operation.\u003c\/li\u003e\n\u003cli\u003eEasy wall-mount design with non-corrosive aluminum towers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePERF-25: 25 SCFM delivered to one gun at 100 PSI; ½\" NPT inlet, ⅜\" NPT outlet; inlet flow required 29 SCFM max\u003c\/li\u003e\n\u003cli\u003ePERF-50: 50 SCFM delivered to two guns at 100 PSI; (2) ⅜\" NPT outlets with ball valves; inlet flow required 54 SCFM max\u003c\/li\u003e\n\u003cli\u003eDryer capacity: -40°F dew point\u003c\/li\u003e\n\u003cli\u003eFiltration: 99.99998% at 0.01 micron\u003c\/li\u003e\n\u003cli\u003ePurge flow: 1–2 SCFM\u003c\/li\u003e\n\u003cli\u003eMax. temperature 120°F · Max. pressure 100 PSI\u003c\/li\u003e\n\u003cli\u003eElectrical: 110 VAC, 0.1 A (0.3 A fused), 5' power cord, NEMA 4 enclosure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePERF-25: ARAD-25 regenerative desiccant dryer, PERF-25-PF 2-stage pre-filter, ½\" inlet regulator, ½\" ball valve inlet, PERF-25-AF after filter with ⅜\" regulator, outlet drain hose kit, support brackets\u003c\/li\u003e\n\u003cli\u003ePERF-50: ARAD-50 regenerative desiccant dryer, PERF-50-PF 2-stage pre-filter, ¾\" regulator, ½\" ball valve inlet, PERF-50-AF after filter with ½\" regulator and 2-port manifold, outlet drain hose kit, support brackets\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplacement Elements\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePERF-25: 3P-060 (pre-filter 1st stage), 3C-060 (pre-filter 2nd stage), 3C-060 (after filter) — or the PERF-25-MK maintenance kit\u003c\/li\u003e\n\u003cli\u003ePERF-50: 3P-090, 3C-090, 3C-060 — or the PERF-50-MK maintenance kit\u003c\/li\u003e\n\u003cli\u003eDesiccant re-pack every 3–5 years: PERF-25-RK \/ PERF-50-RK, or swap towers with the -TC \/ -TCMK kits\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAutomotive refinish paint booths spraying waterborne or solvent basecoats\u003c\/li\u003e\n\u003cli\u003eHVLP and conventional spray guns\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eUsage \u0026amp; Care\u003c\/h3\u003e\u003cp\u003eMount the dryer outside the paint booth, as close to the application as possible. On first start-up, run purge flow only for at least 1 hour. Set the inlet regulator to 100 PSI and the outlet to 70 PSI. Replace filter elements every 6 months, or sooner with heavy use.\u003c\/p\u003e\u003cp\u003eRecommended accessories: the RTi MR-1 paint gun regulator and a high-volume spray hose (one per gun).\u003c\/p\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich elements does it use, and how often should I change them?\u003c\/strong\u003e\u003cbr\u003ePERF-25: 3P-060 (pre-filter 1st stage), 3C-060 (pre-filter 2nd stage) and 3C-060 (after filter). PERF-50: 3P-090, 3C-090 and 3C-060. Change elements every 6 months, or sooner with heavy use; the PERF-25-MK and PERF-50-MK kits contain a full set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many spray guns does each system support?\u003c\/strong\u003e\u003cbr\u003eThe PERF-25 delivers 25 SCFM to one gun at 100 PSI (inlet flow required 29 SCFM max). The PERF-50 delivers 50 SCFM to two guns at 100 PSI (inlet flow required 54 SCFM max).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat do the stages do?\u003c\/strong\u003e\u003cbr\u003eThe 1st pre-filter stage uses Inverse-Flow® to remove condensate and particulate to 1 micron. The 2nd stage coalesces oil aerosol and fine particulate to 0.01 micron. The regenerative desiccant dryer brings the air to a -40°F dew point, and the after filter filters to 0.01 micron before the gun.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the desiccant need changing?\u003c\/strong\u003e\u003cbr\u003eThe dryer reconditions its desiccant with a dry-air purge, so there is no routine desiccant change. RTi calls for a desiccant re-pack every 3–5 years using the PERF-25-RK \/ PERF-50-RK kits, or a tower swap with the -TC \/ -TCMK kits.\u003c\/p\u003e\u003ch3\u003eDocuments \u0026amp; Downloads\u003c\/h3\u003e\u003cp\u003eTechnical literature published by RTi (Reading Technologies, Inc.):\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.rti-pbe.com\/s\/A046-Perfect-Air-Systems-7hnj.pdf\" target=\"_blank\" rel=\"noopener\"\u003ePerfect Air® systems overview (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.rti-pbe.com\/s\/A047-PERF-25-83zt.pdf\" target=\"_blank\" rel=\"noopener\"\u003ePERF-25 spec sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.rti-pbe.com\/s\/A048-PERF-50-wazm.pdf\" target=\"_blank\" rel=\"noopener\"\u003ePERF-50 spec sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.rti-pbe.com\/s\/PERF-25-Operating-Procedure.pdf\" target=\"_blank\" rel=\"noopener\"\u003ePERF-25 operating procedure (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.rti-pbe.com\/s\/PERF-50-Operating-Procedure.pdf\" target=\"_blank\" rel=\"noopener\"\u003ePERF-50 operating procedure (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.rti-pbe.com\/s\/Filter-Maintenance-Log_PERF-25-npjx.pdf\" target=\"_blank\" rel=\"noopener\"\u003ePERF-25 filter maintenance log (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.rti-pbe.com\/s\/Filter-Maintenance-Log_PERF-50-hlka.pdf\" target=\"_blank\" rel=\"noopener\"\u003ePERF-50 filter maintenance log (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.rti-pbe.com\/s\/PERF-25-Breakdown-jgwd.pdf\" target=\"_blank\" rel=\"noopener\"\u003ePERF-25 parts breakdown (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.rti-pbe.com\/s\/PERF-50-Breakdown-8f9z.pdf\" target=\"_blank\" rel=\"noopener\"\u003ePERF-50 parts breakdown (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eRTi stands behind its products and offers a warranty for up to 1 year after date of purchase.\u003c\/p\u003e\u003ch3\u003eWhy Buy RTi From Spray Booth Shop\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuthorized RTi online dealer\u003c\/strong\u003e — genuine Reading Technologies, Inc. product, made by the company that has built paint-air filtration since 1986.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFree shipping on RTi orders over $1,200.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed something custom?\u003c\/strong\u003e RTi builds units around your shop's exact needs. Call us and we'll work it out with them.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eCA PROPOSITION 65 WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov\/product\u003c\/small\u003e\u003c\/p\u003e","brand":"RTi","offers":[{"title":"PERF-25 – 1 Gun, 25 SCFM","offer_id":49783133143299,"sku":"PERF-25","price":3978.7,"currency_code":"USD","in_stock":true},{"title":"PERF-50 – 2 Guns, 50 SCFM","offer_id":49783133176067,"sku":"PERF-50","price":4873.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0811\/2924\/2883\/files\/RTi-PERF-25.jpg?v=1792440686"},{"product_id":"rti-brad-perf-breathing-paint-air-system","title":"RTi BRAD-PERF Breathing \u0026 Paint Air System with CO Monitor – BRAD-PERF-25C \/ 50C","description":"\u003cp\u003e\u003cstrong\u003eOne system for both: -40°F paint air to the gun and Grade D breathing air to the painter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBRAD-PERF combines RTi's Perfect Air® regenerative desiccant dryer with a breathing-air pre-filter and an inline carbon monoxide monitor. It delivers clean, dry paint air and is designed to supply Grade D breathing air. Choose the BRAD-PERF-25C for single-gun spraying or the BRAD-PERF-50C for two-gun booths. Operator kits are sold separately.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConsistent less than -40°F dew point to the gun.\u003c\/li\u003e\n\u003cli\u003eClean, dry air for paint finishes.\u003c\/li\u003e\n\u003cli\u003eDeep-bed activated carbon stage in the breathing-air pre-filter.\u003c\/li\u003e\n\u003cli\u003eEngineered for use with all paint spray guns (not included), especially HVLP guns.\u003c\/li\u003e\n\u003cli\u003eDesigned to supply Grade D breathing air.\u003c\/li\u003e\n\u003cli\u003eRegenerative desiccant beads require little maintenance.\u003c\/li\u003e\n\u003cli\u003eCO monitor sits directly inline with the air flow.\u003c\/li\u003e\n\u003cli\u003eSelf-calibrating monitor with audible alarm; displays actual CO levels and alarms at 10 ppm.\u003c\/li\u003e\n\u003cli\u003ePower pack with battery back-up supplied with the monitor.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBRAD-PERF-25C: ARAD-25 dryer, up to 25 SCFM at 100 PSI (single gun)\u003c\/li\u003e\n\u003cli\u003eBRAD-PERF-50C: ARAD-50 dryer, up to 50 SCFM at 100 PSI (two guns)\u003c\/li\u003e\n\u003cli\u003eDew point: -40°F\u003c\/li\u003e\n\u003cli\u003eBreathing-air pre-filter (BRAD-PC2C): 1 micron 1st stage, 0.01 micron 2nd stage at 99.9998% efficiency, auto drain on 1st stage, ½\" ball valve inlet\u003c\/li\u003e\n\u003cli\u003eAfter filter: 0.01 micron\u003c\/li\u003e\n\u003cli\u003eDryer: 110 VAC, under 0.1 A, NEMA 4 enclosure, aluminum towers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBRAD-PC2C pre-filter with CO monitor\u003c\/li\u003e\n\u003cli\u003eARAD-25 or ARAD-50 regenerative desiccant dryer\u003c\/li\u003e\n\u003cli\u003ePERF-25-AF or PERF-50-AF after filter with regulator and gauge\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplacement Elements\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePre-filter: DE362C (1st stage) and 3C-151 (2nd stage) — change every 6 months; 1-year kit BRAD-02C-MK\u003c\/li\u003e\n\u003cli\u003eAfter filter: 3C-060\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAutomotive refinish booths that need paint air and supplied breathing air from one system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich elements does it use, and how often should I change them?\u003c\/strong\u003e\u003cbr\u003eThe breathing-air pre-filter uses the DE362C (1st stage) and 3C-151 (2nd stage); change both every 6 months. The BRAD-02C-MK 1-year kit contains (2) DE362C and (2) 3C-151. The after filter uses the 3C-060.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many guns does each version support?\u003c\/strong\u003e\u003cbr\u003eThe BRAD-PERF-25C is for single-gun spraying (ARAD-25 dryer, up to 25 SCFM at 100 PSI). The BRAD-PERF-50C is for two-gun booths (ARAD-50 dryer, up to 50 SCFM at 100 PSI).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the CO monitor do?\u003c\/strong\u003e\u003cbr\u003eIt is self-calibrating, displays actual CO levels and sounds an audible alarm at 10 ppm of CO. A power pack with battery back-up is supplied with the monitor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre masks and hoses included?\u003c\/strong\u003e\u003cbr\u003eNo. Operator kits (mask, non-gassing hose and flow control valve) are sold separately, and spray guns are not included.\u003c\/p\u003e\u003ch3\u003eDocuments \u0026amp; Downloads\u003c\/h3\u003e\u003cp\u003eTechnical literature published by RTi (Reading Technologies, Inc.):\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.rti-pbe.com\/s\/A062-BRAD-PERF-mxlr.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBRAD-PERF spec sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.rti-pbe.com\/s\/A063-BRAD-Series-68dj.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBRAD breathing air series overview (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.rti-pbe.com\/s\/A102-BRAD_NIOSH.pdf\" target=\"_blank\" rel=\"noopener\"\u003eGrade D breathing air \/ NIOSH sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eRTi stands behind its products and offers a warranty for up to 1 year after date of purchase.\u003c\/p\u003e\u003ch3\u003eWhy Buy RTi From Spray Booth Shop\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuthorized RTi online dealer\u003c\/strong\u003e — genuine Reading Technologies, Inc. product, made by the company that has built paint-air filtration since 1986.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFree shipping on RTi orders over $1,200.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed something custom?\u003c\/strong\u003e RTi builds units around your shop's exact needs. Call us and we'll work it out with them.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eCA PROPOSITION 65 WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov\/product\u003c\/small\u003e\u003c\/p\u003e","brand":"RTi","offers":[{"title":"BRAD-PERF-25C – 1 Gun","offer_id":49783134060803,"sku":"BRAD-PERF-25C","price":6742.2,"currency_code":"USD","in_stock":true},{"title":"BRAD-PERF-50C – 2 Guns","offer_id":49783134093571,"sku":"BRAD-PERF-50C","price":7318.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0811\/2924\/2883\/files\/rti-brad-perf-25c.jpg?v=1792431564"}],"url":"https:\/\/sprayboothshop.com\/collections\/rti-paint-air-dryers.oembed","provider":"Spray Booth Shop","version":"1.0","type":"link"}