Replacement Filters for GFS Ultra Spray Booths
The GFS Ultra series from Global Finishing Solutions is a workhorse in production paint shops, valued for strong airflow and clean finishes. That performance depends entirely on the condition of its filters. Once ceiling media loads up, air velocity and uniformity drop and you start chasing dirt in the finish; once exhaust filters clog, extraction falls off and booth pressure climbs. Fresh, correctly sized filters keep a GFS Ultra running the way it was engineered to.
We stock replacement filters for GFS Ultra booths and ship most orders the same business day. Browse the GFS filter collection or use Find My Filter to match parts to your exact booth.
Which Filters Fit a GFS Ultra
A complete GFS Ultra filter set typically covers:
- Ceiling (intake) filters — diffusion media that delivers clean, laminar air to the spray zone; the single biggest driver of finish quality.
- Exhaust filters — high-efficiency paint-arrestor media capturing overspray before air exits the booth.
- Intake / prep-station filters — depending on your GFS Ultra configuration.
Filter sizes vary by booth model and install options, so confirm your frame openings before ordering. See confirmed-fit options in the GFS collection, or send us your dimensions and we'll match them.
When to Change GFS Ultra Filters
Intervals depend on throughput and coatings, but as a general guide:
- Ceiling filters: every 3–6 months, or sooner if finish quality slips or air balance changes.
- Exhaust filters: change on differential pressure — when the manometer reads the manufacturer's limit, typically every few weeks to a couple of months in steady production.
Monitor pressure drop rather than relying on the calendar. Rising static pressure is the booth signaling loaded filters. Keeping spares on the shelf means you never spray through a clogged set.
Custom-Cut Ceiling Filters for GFS Ultra
If your GFS Ultra plenum calls for a non-standard size, our Custom-Cut Ceiling Filter Blanket is made to your exact dimensions — a precise fit with no gaps for overspray to bypass. It's the simplest fix for modified or older layouts, and it ships fast.
Compliance Note
Per EPA 40 CFR Part 63 Subpart HHHHHH ("NESHAP 6H"), spray booths must use filter technology demonstrated to capture at least 98% of paint overspray, with filter-efficiency documentation kept on file. NFPA 33 (§5.1.1.2) requires intake filters in wall/ceiling assemblies to be UL 900 listed. Match filters to your booth manufacturer's specifications and your local Authority Having Jurisdiction. This information is general guidance only and is not legal advice — code editions and AHJ requirements vary.
Why Buy Your GFS Ultra Filters From Us
- Same-day shipping on most in-stock filters.
- Custom-cut sizing for any plenum or frame opening.
- Technician-backed — we service booths in the field and know what fits and lasts.
Ready to reorder? Shop the GFS filter collection, match parts with Find My Filter, or call 800-381-0149 (Mon–Fri, 8am–4pm MST) and we'll confirm the exact filters for your GFS Ultra.