Replacement Filters for Garmat 3000 Spray Booths
The Garmat 3000 is one of the most common downdraft booths in collision and refinish shops across the U.S. Like every paint booth, it only performs as well as the filters inside it. Loaded ceiling filters starve the booth of clean air and ruin finish quality; clogged exhaust filters slow extraction, trigger pressure faults, and let overspray escape. Keeping fresh, correctly sized filters in your Garmat 3000 protects your finish, your airflow balance, and your compliance standing.
We stock the full range of replacement filters for the Garmat 3000 and ship most orders the same business day. Not sure which filters you need? Start with our Garmat filter collection or use Find My Filter to match parts to your exact booth.
Which Filters Fit a Garmat 3000
A complete Garmat 3000 filter set covers three stages:
- Ceiling (intake) filters — diffusion media in the plenum that delivers clean, even air to the spray zone. These are the filters that most affect finish quality.
- Exhaust / floor filters — high-capacity paint-arrestor media that captures overspray before air leaves the booth.
- Prep-station and door filters — where your Garmat 3000 layout includes them.
Because booth configurations vary by install year and options, confirm your frame openings before ordering. Browse confirmed-fit options in the Garmat collection, or send us your dimensions and we'll match them.
When to Change Garmat 3000 Filters
Changeout intervals depend on volume and the coatings you spray, but as a general guide:
- Ceiling filters: every 3–6 months, or sooner if finish quality drops or air balance shifts.
- Exhaust filters: monitor with a manometer and change when pressure drop hits the booth manufacturer's limit — typically every few weeks to a couple of months under steady production.
The reliable rule: change on differential pressure, not the calendar. Rising static pressure is your booth telling you the filters are loaded. Stocking spares means you never paint through a clogged set.
Custom-Cut Ceiling Filters for Garmat 3000
If your Garmat 3000 plenum needs a non-standard size, our Custom-Cut Ceiling Filter Blanket is made to your exact dimensions — no trimming, no gaps, no overspray bypass. It's the cleanest way to fit older or modified booths, and it ships fast.
Compliance Note
Per EPA 40 CFR Part 63 Subpart HHHHHH ("NESHAP 6H"), spray booths must use filter technology demonstrated to capture at least 98% of paint overspray, and operators must keep filter-efficiency documentation on file. NFPA 33 (§5.1.1.2) requires intake filters in wall/ceiling assemblies to be UL 900 listed. Always match filters to your booth manufacturer's specifications and your local Authority Having Jurisdiction. This information is provided for general guidance only and is not legal advice — code editions and AHJ requirements vary.
Why Buy Your Garmat 3000 Filters From Us
- Same-day shipping on most in-stock filters.
- Custom-cut sizing for any plenum or frame.
- Technician-backed — we service spray booths in the field, so we know what fits and what lasts.
Ready to reorder? Shop the Garmat filter collection, match parts with Find My Filter, or call us at 800-381-0149 (Mon–Fri, 8am–4pm MST) and we'll confirm the exact filters for your Garmat 3000.