Garmat Exhaust Tower Filter Bag – Fits Chinook, Tier 1 & Frontier Booths – 4-Pack

Keep overspray in the filter, not in your finish or your stack. These bags are cut to the exact taper of Garmat Chinook, Tier 1 and Frontier towers, ship the same day when ordered by 2pm MT, and come four to a case so one box covers a full changeout. Fits your booth or we make it right.

The Garmat Exhaust Tower Filter Bag delivers high-capacity overspray capture for Garmat tower-style spray booths. Made from E75 recycled polyester media (G4 grade, 265 g/m², 30 mm thick), each bag traps excess paint before air exits the booth. Hand-sewn seams and a built-in pocket for hanging rods ensure a secure, proper fit. Sold in cases of 4.

Tower booths concentrate all of the exhaust through a small number of bags, so each one works considerably harder than a flat exhaust filter of the same area. The taper matters: the bag is cut to match the tower's geometry so the media sits square in the airstream. A bag that does not fit the tower lets air take the path of least resistance around the edges, and overspray that bypasses the filter ends up in the stack instead of in the media.

Key Features

• E75 recycled polyester media: G4-grade media that captured 100% of 10-micron test particles.
• Tapered tower design: 35 inch at the bottom, 19 inch at the top, and 65 inch tall to fit Garmat tower booths.
• Hand-sewn seams and rod pocket: secure hanging and a proper, leak-free fit.
• Eco-friendly: made from recycled polyester without sacrificing performance.
• Pack quantity: 4 bags per case for a full booth changeout.

Best For

• Exhaust overspray capture in Garmat tower-style spray booths
• Automotive refinishing and collision center finishing
• High-volume production paint operations

Compatibility

• Garmat Chinook
• Garmat Tier 1
• Garmat Frontier

Usage & Care

Change about every 50 to 100 spray hours, or when the manometer reaches its limit. High-solids primers and heavy production load the bags faster; mostly-basecoat work loads them slower.

Change the full set of four rather than replacing bags individually — airflow follows the least-restricted path, so a single new bag among three loaded ones takes a disproportionate share of the air and loads up early.

Filter color may vary between production runs and does not affect filtration performance.

Test Data

G4 polyester media, 265 g/m², 30 mm (1.18 in) thick. In an ANSI/ASHRAE 52.2 particle-size test it captured 100% of 10-micron particles and 50% at 5 microns. Manufacturer test, June 2021.

Download the spec sheet (PDF)