Replacement Filters for DeVilbiss Spray Booths
DeVilbiss is a name shops trust across spray equipment and booths alike. Whatever DeVilbiss booth you run, its finish quality and airflow balance come down to the filters inside it. As ceiling media loads, air uniformity drops and dirt finds its way into the finish; as exhaust filters clog, extraction falls off and booth pressure climbs. Fresh, correctly sized filters keep a DeVilbiss booth performing the way it was built to.
We stock replacement filters for DeVilbiss booths and ship most orders the same business day. Browse the DeVilbiss filter collection or use Find My Filter to match parts to your exact booth.
Which Filters Fit a DeVilbiss Booth
A complete DeVilbiss filter set generally covers:
- Ceiling (intake) filters — diffusion media delivering clean, even air to the spray zone; the biggest driver of finish quality.
- Exhaust / floor filters — paint-arrestor media capturing overspray before air leaves the booth.
- Prep-station and intake filters — depending on your DeVilbiss configuration.
Sizes vary by model and install year, so confirm your frame openings before ordering. See confirmed-fit options in the DeVilbiss collection, or send us your dimensions and we'll match them.
When to Change DeVilbiss Filters
Intervals depend on throughput and coatings, but as a general guide:
- Ceiling filters: every 3–6 months, or sooner if finish quality slips or air balance changes.
- Exhaust filters: change on differential pressure — when the manometer reads the manufacturer's limit, typically every few weeks to a couple of months in steady production.
Track pressure drop rather than the calendar. Rising static pressure tells you the filters are loaded. Keeping spares on hand means you never spray through a clogged set.
Custom-Cut Ceiling Filters for DeVilbiss
If your DeVilbiss plenum needs a non-standard size, our Custom-Cut Ceiling Filter Blanket is made to your exact dimensions — a precise fit with no gaps for overspray to bypass. It's the easiest fix for modified or older layouts, and it ships fast.
Compliance Note
Per EPA 40 CFR Part 63 Subpart HHHHHH ("NESHAP 6H"), spray booths must use filter technology demonstrated to capture at least 98% of paint overspray, with filter-efficiency documentation kept on file. NFPA 33 (§5.1.1.2) requires intake filters in wall/ceiling assemblies to be UL 900 listed. Match filters to your booth manufacturer's specifications and your local Authority Having Jurisdiction. This information is general guidance only and is not legal advice — code editions and AHJ requirements vary.
Why Buy Your DeVilbiss Filters From Us
- Same-day shipping on most in-stock filters.
- Custom-cut sizing for any plenum or frame.
- Technician-backed — we service spray booths in the field and know what fits and lasts.
Ready to reorder? Shop the DeVilbiss filter collection, match parts with Find My Filter, or call 800-381-0149 (Mon–Fri, 8am–4pm MST) and we'll confirm the exact filters for your DeVilbiss booth.