Metal Fabrication Booth Filters: Welding-Adjacent Dust & Fume
Filtering a metal fab booth: combined paint overspray and grinding dust, prefilter staging, media choice, weld-fume capture, and NESHAP 6X vs. 6H explained.
Spray Booth Shop |
Resources
Metal Fabrication Booth Filters: Welding-Adjacent Dust & Fume
-
Garmat Paint Booth Filter Part Numbers: Full Cross-Reference & Replacements
Which replacement fits your Garmat 3000, Chinook, Tier 1, or Frontier booth? A plain-English cross-reference for Garmat ceiling, exhaust bag, and prefilter media, plus how to size them.
Spray Booth Shop |
-
Paint Finish Defect Diagnostic Hub: What Filter, Airflow, or Booth Issue Is Causing It?
Dirt nibs, orange peel, fisheyes, sags — a meaningful share of finish defects trace back to booth environment. Diagnostic checklist by defect type.
Spray Booth Shop Team |
-
PCE and TCE Phase-Out: What Body Shops Need to Know
EPA's TSCA rules phase out perchloroethylene (PCE) and trichloroethylene (TCE) for most commercial uses. Body shops need compliant substitutes on the same timeline as MeCl.
Spray Booth Shop Team |
-
NESHAP 6H Isn't Going Anywhere: Why the 98% Capture Rule Is Stable Through 2030+
The 98% capture standard for paint booth exhaust filters is one of the most stable EPA rules on the books. Here's why shops should plan multi-year filter commitments confidently.
Spray Booth Shop Team |
-
MERV vs. Arrestance vs. 98% Capture: Which Filter Rating Actually Matters for NESHAP 6H?
MERV, arrestance, and 98% capture measure different things. Only 98% capture (per 40 CFR 63.11173) satisfies NESHAP 6H. Here's how to read filter certs correctly.
Spray Booth Shop Team |
-
The Methylene Chloride Ban: What Paint Booth Shops Need to Know Before April 28, 2026
Methylene chloride is banned for most commercial paint-stripping uses on April 28, 2026. What body shops and refinishers need to switch to before the deadline.
Spray Booth Shop Team |
-
Spray Booth Filters for Woodworking & Furniture
Wood finishing has different filtration needs than auto body. Here's how to pick intake and exhaust filters for lacquer, stain, and fine-finish work.
Spray Booth Shop |
-
Troubleshooting Low Airflow in Your Spray Booth
Booth not pulling like it used to? Work through this step-by-step diagnosis — filters, fan, ducting, and balance — to find and fix the airflow loss.
Spray Booth Shop |
-
The Real Cost of a Cheap Paint Booth Filter
A cheaper filter isn't always cheaper. Here's the cost-per-cycle math on loading rate, redo work, and finish quality that the sticker price hides.
Spray Booth Shop |
-
Reading a Paint Booth Manometer: A Simple Guide
Your booth's manometer tells you exactly when to change filters. Learn to read pressure drop, set your change-out point, and stop guessing.
Spray Booth Shop |
-
Pleated vs Panel vs Roll Intake Filters: Which to Use
Three ways to filter intake air in a spray booth — pleated, panel, and roll media. Here's how they compare on airflow, cost, and booth type.
Spray Booth Shop |
-
Setting Up a New Spray Booth: Filter Starter Checklist
New booth? Here's exactly which filters to stock on day one and what spares to keep on hand so you're never down waiting on a delivery.
Spray Booth Shop |
-
NESHAP 6H Recordkeeping: What to Keep on File
A practical checklist of the filter, training, and notification records shops keep for EPA NESHAP 6H. Informational only — not legal advice.
Spray Booth Shop |
