DeVilbiss Ceiling Filter Blanket – F5 Tackified Polyester – Fits Legacy & Concept Cure Booths

Keep your legacy DeVilbiss spray booth running with this F5-grade tackified polyester ceiling filter, cut to fit the standard ceiling-bank sizes of DeVilbiss crossflow booths and the iconic 1983+ Concept Cure insulated downdraft. Available in 28.5" × 118" (Concept Cure and full-length crossflow) and 39" × 39" (square / compact crossflow configurations). DeVilbiss hasn't manufactured spray booths under its own brand since the late 1990s — the booth division was sold to Blowtherm USA in 1998 and rebranded as Team Blowtherm, so OEM ceiling filters are no longer in production. We stock aftermarket blankets specifically because the OEM no longer does. Non-standard bank? Order our Custom Cut Ceiling Filter Blanket in any size. Backed by our fitment + 98% NESHAP capture guarantee — if it doesn't fit or doesn't meet spec, we make it right.

Sizing note: DeVilbiss booth dimensions vary depending on era of manufacture (US-built crossflow, Concept Cure Canadian downdraft, or Team Blowtherm-era). Measure your existing ceiling filter grid before ordering.

Key Features

• 90%+ filtration efficiency on particles greater than 10 microns
• 600 g/m² weight, 20mm thickness — high dust-holding capacity and long service life
• Progressive (gradient) construction — fiber density increases toward the clean-air side, trapping fine particles deeper into the media
• Impregnated tackifier throughout — paint particles bond to the media instead of releasing downstream
• UL 900 Class 1 + DIN 53438-F1 fire-safety rated — meets NFPA 33 requirements for spray booth filtration
• Heat-sealed 9-gauge support frame — holds shape under load, won't sag at peak airflow

Specifications

• Media: F5/EU5/M5-grade tackified 100% polyester
• Weight: 600 g/m²
• Thickness: 20mm (±3mm)
• Efficiency: 90%+ at particles >10 microns
• Wind velocity rating: 0.25 m/s
• Fire safety: UL 900 Class 1 / DIN 53438-F1

Compatibility

• Legacy DeVilbiss Crossflow spray booths (1950s–1980s US manufacture)
• DeVilbiss Concept Cure insulated downdraft (1983+ Canadian manufacture)
• DeVilbiss industrial finishing and OEM coating booths
• Team Blowtherm-era booths derived from the DeVilbiss product line (post-1998 acquisition)
• Any DeVilbiss installation still using original ceiling-bank dimensions

Options & Sizes

• 28.5" × 118" — fits DeVilbiss Concept Cure and full-length crossflow ceiling banks
• 39" × 39" — fits DeVilbiss square ceiling-bank configurations and smaller crossflow units

Applications

• Automotive collision and refinish on legacy DeVilbiss installations
• Concept Cure paint-and-bake operations
• Industrial coating and OEM production-line painting
• Any operating DeVilbiss-branded booth requiring F5/EU5-grade ceiling intake filtration aftermarket support

Usage & Care

Replace ceiling filters every 3–6 months depending on production volume and paint type. Concept Cure downdraft booths and legacy crossflow units have older airflow systems that are less forgiving of restricted filtration — change at the quarterly mark for high-volume shops and inspect monthly for visible loading. If your booth's pressure-differential gauge drifts outside its original spec, replace the ceiling blanket immediately.